Monroe-electronics Charge Plate - Monitor - model 288B Manuale Utente Pagina 19
- Pagina / 22
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
19
Section 5
MAINTENANCE
Precautions —
User maintenance should normally be limited to keeping the instrument clean and free from
physical damage. Store the instrument in its protective carrying pouch when not in use.
Cleaning —
Fingerprints and other contaminants may be removed from the case with a clean lint-free cloth
dampened in a 70%/30% mix of clean technical grade isopropyl alcohol and de-ionized water.
DO NOT use soap or detergent.
Battery —
Battery voltage is monitored and displayed on the MAIN screen. Normal range of operation is
between 10 and 15 volts. When the battery has discharged to below 10 volts, a warning
message is displayed and the instrument shuts down 15 seconds later terminating any activity
in progress. Battery charge life depends on type of tests being run and the settings selected in
the OPTION menu. Testing may be resumed using AC power.
A complete re-charge cycle takes 4-6 hours with power off.
Charge State Indicator —
While the unit is connected to an AC power line and in an inactive state, the upper half (red) of
the PLATE VOLTAGE bar graph serves as a battery state-of-charge indicator with maximum
being a float condition and minimum implying that the battery requires further charging. The
“x1” and “x2” range lights will be lit. If the power cord becomes disconnected, the LED’s will
continue to report the battery status for several minutes.
Calibration —
Calibration is not a user function and is beyond the scope of this manual. Calibration
information is available from the factory. Monroe Electronics recommends annual calibration
and/or when the instrument is damaged or repaired or where called for more often by contract.
We offer repair and calibration services for a fee.
- CONTENTS 2
- Section 1 4
- Specifications 4
- Accessories Included: 5
- Section 2 7
- GENERAL INFORMATION 7
- Section 3 8
- SETUP SYSTEM Menu: 8
- SETUP for Manual Test Menu: 9
- SETUP - OPTION Menu: 10
- Section 4 11
- OPERATION 11
- MANUAL OPERATION: 11
- AUTOMATIC OPERATION: 14
- ADDITIONAL FEATURES 17
- Section 5 19
- MAINTENANCE 19
- Section 6 20
- REFERENCES 20
- WARRANTY 21
Prodotti e manuali riguardandi Strumenti di misura Monroe-electronics Charge Plate - Monitor - model 288B
Strumenti di misura Monroe-electronics Charge Plate - Analyzer - model 268A Manuale Utente
(12 pagine)
(12 pagine)
Strumenti di misura Monroe-electronics Charge Plate - Ionizer Performance Analyzer - mode Manuale Utente
(12 pagine)
(12 pagine)
Strumenti di misura Monroe-electronics Charge Plate - System - model 282CPS Manuale Utente
(4 pagine)
(4 pagine)
Strumenti di misura Monroe-electronics Resistivity Meter - Surface - model 262A Manuale Utente
(7 pagine)
(7 pagine)
Strumenti di misura Monroe-electronics Electrostatic Voltmeter - Isoprobe® - model 244A Manuale Utente
(24 pagine)
(24 pagine)
Strumenti di misura Monroe-electronics Charge Plate - Analyzer - model 300 Manuale Utente
(51 pagine)
(51 pagine)
AirLive ETHER-GSH24T manuales
Manuales del propietario y guías del usuario para Los conmutadores de red AirLive ETHER-GSH24T.
Ofrecemos 2 manuales en pdf AirLive ETHER-GSH24T para descargar gratis por tipos de documentos: Manual de usuario
Commenti su questo manuale